Introducing the toughest workboat on the high seas with a radical new range of HDPE boats from Tideman: innovative boat-craft is part of the family

INNOVATIVE BOAT BUILDING IS IN THE FAMILY

Tideman was the name for the man responsible for modernising shipbuilding in the Netherlands back in the mid-1850s—Dr Bruno Joannes Tideman to be precise. What better name could there be?

And if you don’t think lightning strikes in the same place twice (or in the same family), think again: the tide is turning once more in the world of boat-craft and another Bruno Tideman is at the helm—same name, same family, different century. Bruno is back, and so is the pioneering spirit of his illustrious ancestor, with an exceptionally tough workboat range that ticks all the right boxes.

DOING THE FUNDAMENTALS OF BOAT CONSTRUCTION BETTER

It’s difficult to argue that the most important function of any aeroplane is to remain airborne and any water vessel to float; it is on this basis, therefore, that the Tideman workboat range is uniquely qualified to perform better under rigorous conditions than their counterparts, simply because they are constructed from a near indestructible, yet buoyant material—HDPE (High-density polyethylene).

Introducing HDPE into workboat engineering design is quite a radical step, but when we look closer at the concept the advantages are obvious to anyone looking for a light, manoeuvrable, yet virtually indestructible craft.

This fact coupled with a choice of model size (6, 7 or 8 metres) and propulsion (outboard, inboard, diesel, sterndrive or waterjet, single or twin) and other features, means PEpolyethylene boats are suited to a huge variety of maritime applications from crew tendering, diver support and surveying to patrolling, rescue, high-speed interception and military use.

A PE BOAT HAS SOME STAND-OUT FEATURES

RBB Tideman pe boats have some considerable advantages over RIBs, not least of which is the deck space which is up to 50% greater, because they aren’t taken up by inflatable tubes; the compartmentalised hulls are filled with PE balls for flotation instead. And because there are no inflatable tubes it is far less vulnerable.

A PE boat can be taken into shallow, rocky waters with full confidence due to its impact resistant properties—it will bounce off most obstacles and actually spring back to shape even with the roughest treatment.

SOME MORE IMPRESSIVE FEATURES:

  • Zero corrosion—which means no maintenance
  • No marine growth—the hull stays clean and hydrodynamic
  • Impervious to extreme climates—from the Artic to the tropics
  • Carbon footprint is small—5 times lower than manufacturing with aluminium, for example
  • 100% recyclable—doesn’t get more environmentally friendly than that
  • Easy to repair—we aren’t saying that this will happen often but if it does, it is usually a very simple and cheap process

Plastics in boat building have been applied for many years together with rubber tubes. Most vessels made from these materials have proved vulnerable to harsh conditions, making the boats not suitable for harsh environments. To offer a solution to this, hdpe work boats have been developed.

High Density PolyEthylene (HDPE) boats are impregnable and indestructible, a characteristic that makes them ideal for tough environments. hdpe work boats are ideal for daily use due to various operational advantages as highlighted below.

HIGH BUOYANCY

A hdpe work boat is made from a multi-talented material. The mass density of HDPE material lies between 0.93 and 0.97 g/cm3. This is a low density value, making the boat lighter than water. With this fact in mind, the boats have a higher load capacity and will maintain stability while cruising.

ZERO CORROSION

Oxygen and moisture affect aluminium and GRP leading to corrosion, but not HDPE. A pe boat is not affected by either, something that makes HDPE a perfect material for making boats. It is not subject to effect from ravages of time, so zero maintenance is put to the boat.

MARINE GROWTH RESISTANT

While other materials may get affected by marine growth, HDPE requires no anti-fouling. Its bottom is clean and smooth, which keeps its speed and no toxic pollution is introduced to the environment.

NO HARM WITH AGGRESSIVE LIQUIDS

HDPE offers an indestructible boat going by the fact that it is not corroded by aggressive liquids or chemicals. Using aggressive fuels with the boat is possible without need for maintenance regularly.

HIGH TENSILE STRENGTH

Sharp rocks can make it challenging for one to use a boat seamlessly. With HDPE, this is not something to worry about since the material offers high tensile strength. Bumping into sharp rocks will not distort the shape of the boat or tear some of its parts. Its viscous and elastic properties shield HDPE from deformation and cracking. It is not only tough, but also flexible.

SHOCK ABSORBING

Being unsusceptible to shocks makes HDPE a reliable material for rocky shores. Being soft and tough, the material absorbs any shock generated while at the same time ensuring the boat does not tear or get damaged. It returns to its original shape after impact automatically dissolving any dents.

EASE OF REPAIR

Although situations that call for repair rarely occur with HDPE boats, there are many available materials to effect the repair work. Most companies that deal with plastics locally can repair the boat and this will not cost a lot. One can also use DIY methods with a welding kit.

RECYCLABLE AND DURABLE

Aluminium boats have a limited lifespan and are not easy to recycle. Deterioration of metal parts will make aluminium a scrap that cannot be revived for further use. HDPE, however, can be melted and recycled to make new PE blend. Before you can even think about recycling or disposing of the boat, it will have served many years and probably will still be stable enough to do more.

If you would like further information or have a specific enquiry about Tideman HDPE work boats, we will be pleased to help. Plese send an e-mail to info@tidemanboats.com. We will get back to you as soon as possible.

“INNOVATION IS ABOUT IMPROVING WHAT’S BOTHERING YOU. FOR ME: VULNERABLE BOAT MATERIALS IN ROUGH ENVIRONMENTS. THAT BOTHERED ME, TREMENDOUSLY.”
Bruno Tideman, founder Tideman Boats

TIDEMAN HDPE WORKBOATS: BUILT TO LAST

Our unsinkable boats are set to revolutionise the day-to-day operations of maritime professions everywhere. The Tideman RBB (Rigid Buoyancy Boat) is a seriously tough workboat requiring zero maintenance. If only the Titanic was a Tideman. read more about our indestructible workboats >>


ERIC JES JOINED OUR TEAM.

As an experienced manager in sales with a passion for understanding the customers’ needs and getting things done without compromising quality or agreed time schedule and a no nonsense approach, Eric is a welcome new team member. You can contact Eric for product- or sales information: +31 651509017 or by email: eric@tidemanboats.com.

Read more about Eric Jes >>


DEMO HDPE VESSEL

Especially for exhibitions and to demonstrate the benefits of our HDPE boats we have now access to a 8 mtr demo vessel provided with diesel waterjet propulsion. If you like to experience the advantages, please contact Bruno or Eric. They are pleased to inform you about seatrial possibilities and they are able to make an appointment.

Read more: 10 reasons to choose HDPE >>

VISIT US AT SMM HAMBURG 6-9 SEPT. 2016:

In co-operation with Cimco Marine we will show you the latest developments at SMM Hamburg . So we will exhibit our RBB 700 OB. This open HDPE workboat provided with an 200 hp OXE outboard diesel engine is a indestructible and very reliable combination.

Read more:about SMM >>


‘UNDER CONSTRUCTION’:

More and more professional boat users discover the advantages of the Tideman HDPE workboats. So we have in this moment in production:

2x RBB 800 WJ Cabin Pilot boats (9m cabin boat with diesel waterjet)
1x RBB 800 2OB Open Military spec. Patrol Boat (9m open boat with twin outboard diesel engines)
2x RBB 800 2OB Survey boats (9m cabin with twin outboard engines)
1x RBB 800 2OB Open Camera boat (9m open center console boat with twin outboards)
1x RBB 700 WJ Open Patrol Boats (8m open center console with diesel waterjet)

THE TIDEMAN WORKBOAT EXPLAINED

What is a Tideman Workboat, you may be asking. Simply put, a Tideman Workboat is a type of HDPE boat (high-density polyethylene) that offers safe high speeds and extremely durable use out in rough environments, from Arctic seas to shallow shorelines.

Manufactured by Tideman Boats, a historic boat-maker in the Netherlands, customers looking for spacious, long-lasting solutions will find them here with our customisable models, which come in three sizes and offer various added features. The material these boats are made from – HDPE – has many beneficial properties that are ideal for boat construction and sailing.

As the brand name suggests (“Workboat”), these sturdy vessels are suitable for companies working in a wide range of industries such as fishing, dredging and patrolling.

WHO CAN BENEFIT FROM A HDPE BOAT?

Our easy-to-operate HDPE boats are targeted towards anyone looking to sail in rough conditions that would normally take their toll on regular speed boats. For instance, if your company operations involve working regularly in shallow waters, where rocks and sharp outcrops lie close to the surface, then a HDPE vessel is the ideal solution, thanks to an impressively robust hull.

Fishing and dredging workers regularly encounter these kind of environments on rivers and shorelines all over the world, so why not use a Tideman Workboat to support your operations? The speed of a boat such as this one also makes it ideal for intercepting other boats while out at sea, which is a regular occurrence for patrols in the military and security industries.

Also, those concerned about their carbon footprint will be pleased to know that HDPE is a material five times more environmentally friendly than aluminium!

COMPARING CONVENTIONAL MODELS WITH THE TIDEMAN

A HDPE vessel is an innovative solution to the wear and tear often seen on GRP boats (glass reinforced plastic) and RIBs (rigid-hulled inflatable boats). Significantly, HDPE manufacturers don’t have to worry about incorporating vulnerable rubber tubes into their designs, which can become damaged in tough conditions – especially when passing over shallow waters.

Instead, why not rely on the RBB (rigid buoyancy boat) concept seen with the Tideman Workboat. One of its unique features is its indestructible HDPE body, which removes the need for bulky inflatable tubes – creating 50% more space on deck – while remaining exceptionally buoyant.

“INNOVATION IS ABOUT IMPROVING WHAT’S BOTHERING YOU. FOR ME: VULNERABLE BOAT MATERIALS IN ROUGH ENVIRONMENTS. THAT BOTHERED ME, TREMENDOUSLY.”
Bruno Tideman, founder Tideman Boats

TIDEMAN HDPE WORKBOATS: BUILT TO LAST

Our unsinkable boats are set to revolutionise the day-to-day operations of maritime professions everywhere. The Tideman RBB (Rigid Buoyancy Boat) is a seriously tough workboat requiring zero maintenance. If only the Titanic was a Tideman. read more about our indestructible workboats >>


NEW: CABIN PILOT BOAT.

Together with our customer ‘Brabo Antwerp; pilots and boatmen’ we have developed a cabin version of our proven RBB 800 WJ hull. We’ll launch this new evolution version as the HDPE RBB 800 WJ Cabin Pilot Boat. Equipped with a closed cabin for 4-6 persons, this boat can be operated all year around in arctic and tropical conditions. The crew is sitting on high quality suspension seats. The cabin is comfortably provided with heating or air-conditioning. The main usage is as crew tender, pilot boat, survey boat or stand by patrol vessel.

Depending on personal preference, local circumstances and conditions, there are two possible propulsions available: This boat is available with diesel water jet and sterndrive or twin outboard engines. Cruise speed of 30 knots and typically for coastal, riverine and estuary waters. With 4 lifting slings the boat can be easily hoisted on deck of the mother vessel. Bureau Veritas design approval is available upon request.Transport and storage is easy as this boat is trailer able and still fits inside a 40’ HC.

Read more about possible configurations >>


‘SMALL BUT POWERFULL’: RBB 550 OB

This little workhorse, the RBB 550 OB, is now available with 50hp diesel outboard, 70hp petrol outboard or 20hp electric outboard. It is the smallest high speed vessel in our range and can be used as dinghy and support boat. We always have stock available waiting for your order!


SERIOUS TEST TIDEMAN BOATS!

Our indestructible boats drew the attention of the Dutch army. This interest resulted in a serious heavy test program. So last autumn our boats have been tested by our friends of the Royal Dutch Marine Corps. The test results are available upon request. Please don’t hesitate to contact us. We think we can be proud of the results and we like to inform you, without any obligations.

BRABO PILOTS & BOATMEN, ANTWERP

Pilotboat #63 was delivered this week and one more to go!
This RBB 800 WJ Cabin is a real good tool for them to use in the port for all their duties. We have supplied them with 5 identical vessels so far.


Trade shows 2017

we will show you the latest developments at several tradeshows:

www.seawork.com
13-15 June 2017, Southampton

www.europort.nl
7-10 November 2017, Rotterdam

We look forward seeing you!

NO TUBES. That’s the winning point. No tubes, so no vulnerable inflated rubber elements. And 50% MORE DECKSPACE. And then of course the use of HDPE: indestructible. RBB is the absolute winner. Especially in rocky or shallow waters.

HDPE boats: strong alternative to RIBs

When talking about hull material in boatbuilding, GRP and aluminium RIB’s with rubber tubes immediately sping to mind. Vessels made of quite vulnerable materials. They are far from ideal when working in tough environments like rocky shores, shallow waters or arctic conditions.

This is exactly why we created our RBB: Rigid Buoyancy Boat. A RIB-shaped hull made from HDPE (High Density Poly Ethylene). A material that’s light, durable, inert and indestructable.

RBB’s are excellent when you need a high speed boat with good seakeeping capabillities.

RBB vs RIB: NO TUBES + HDPE
The RIB has its qualities, of course. Like the shape of the hull. It has been a winner for a very long time. But two things that make the boat ready for improvement: the giant but very vulnerable air tubes, and the materials being used (GRP and aluminium). Get rid of the tubes and use HDPE. MORE INDESTRUCTIBLE IS NOT POSSIBLE.

RBB has 50% more deckspace

No tubes needed in our RBB. So no massive, inflated, space taking roundings. We use removable PU foam fenders for boarding and docking to protect your boat and the others. Using these compact fenders results in 50% more deck space than a conventional RIB. (Yes, that’s correct: FIFTY PERCENT!!)

Impact resistance

Again: NO TUBES. The RBB has no tubes that are very vulnerable. The HDPE hull easily absorbs any shocks. Perfect for rough environments like harbors or shallow waters. Bumping into an unexpected floating objects, like a container? We smile and cruise on.

Very agile, high speed

The shape of the deep V-hull combined with the propulsion make the RBB very easily maneuverable. High speed: upto 50knots.

Excellent seakeeping

Safety is key. The RBB hull provides a safe working platform, even in high seas or during bumpy rides.

Container fit and trailerable

On the water the RBB is a high speed and very maneuvrable. But don’t underestimate what the RBB can do on land: the RBB is:

Very easy to transport

The moulded beam is 2.30m – so container fit. And the maximum weight is below 2.8ton – so trailerable. Off you go!

Ask Bruno for more reasons to choose RBB. He lives HDPE, he dreams about boats, he’s wild enthusiastic about the indestructibleness of his RBB’s, and yes, he’s happy that he manufactures a product that LOWERS THE CARBON FOOTPRINT (5 times less then aluminium!).

Comments and questions are very welcome in the section below. Or call Tideman Boats. It would be on honor to us.

So far!

No one is more enthusiastic about HDPE that mister Bruno Tideman himself. THE SOLUTION he calls it. To a major problem in the boat industry. HDPE is indestructible. It cannot sink. Rocks have no impact on it. No maintenance. And: using HDPE LOWERS THE CARBON FOOTPRINT 5 TIMES compared to aluminium.

The old GRP is very easily damaged as are the rubber RIB tubes. One rock, one bump onto the shore and it’s game over. NOT WITH HDPE: a material unlike any other boat building material. It’s light (lighter than water), durable (easy to recycle), inert (no acid effects the surface), and indestructible (we invite you to use a hammer: won’t make a dent).

10 reasons to choose a HDPE workboat

1. Super buoyancy – lighter then water
HDPE is a multi-talented material. Let’s start with its density: it can range from 930 to 970 kg/m3. That makes HDPE lighter than water. And that makes HDPE extremely buoyant, even when submerged.

2. Zero corrosion – zero maintenance
Oxygen, salt and water have no effect on HDPE. HDPE will not be affected by the ravages of time. Paint system: obsolete. Salt water: no need to rinse. Simply put: HDPE offers zero corrosion, zero maintenance.

3. Resistance to marine growth – no anti fouling needed
With an HDPE hull you will never have to deal with marine growth: it just doesn’t stick. So thanks to its continuous clean and smooth bottom the fast HDPE boat keeps its speed. Without anti-fouling, mind you. So no toxic pollution, no environmental damaging.

4. Aggressive liquids? No harm done!
Working with chemical or fuels? Great news: HDPE can hardly be affected by any aggressive liquids.

5. High impact resistance – not afraid of sharp rocks
RIB tubes are quickly damaged when bumping into a sharp rock or rampart. Not HDPE. Its viscous and elastic characteristics prevent from both deformation of cracks. HDPE is both tough and flexible thanks to its elastic properties A strong HDPE hull is perfect if you work close to the shore.

6. Black strength: UV resistancy
Frequently asked question: could we get the boat in a different colour? No. We only use black HDPE because of its UV resistancy. Black HDPE is mixed with carbon, which prevents the material to become brittle due to exposure of the sun in tropical conditions.

7. Production flexibility
Our HDPE boats are constructed by plate welding, giving great flexibility in creating a boat shaped exactly to your needs. This includes the installation of additional components like benches and storage compartments. Need adjustments in lay-out? Easy as pie with HDPE.

8. Easy of repair
What if you need to repair something on your HDPE boat? Mind you, this is a big IF, because these situations rarely occur with HDPE. We just get that question a lot. The answer is simple: any local plastic production company can do it for you. Or DIY – ask us for your own welding kit.

9. Low carbon footprint
The carbon footprint of HDPE production is 5 times lower than aluminium! And that’s only one aspect when it comes to durability. Another: an HDPE boat is indestructible, so will stay with you for 10, 20, 30, 40 years.

10. Durability: 100% recyclable
GRP boats have a limited lifespan and are impossible to recycle. The same goes for aluminium: metal deterioration will send any aluminium boat to the scrapheap at one point. HDPE, however, is a different story. It can be 100% remelted and recycled in a new PE blend.

Why should you melt it, recycle it? You shouldn’t, you needn’t. We just thought you would like to know you could. That’s all.

The magic is in the family. Boats have always played a major role in the history of the Tideman’s. It began with ancestor Bruno Joannes Tideman (1834 – 1883). Founder of modern ship building in The Netherlands. Well known in his time, he received a Royal decoration for his innovative ideas. It’s 2015 now AND TIDEMAN IS BACK. Again a Bruno, again in maritime business, again innovative.

Tideman is back!

History repeats itself. In this day and age with Tideman Boats, founded by Bruno Tideman, who’s in the boat industry since 2006.

Bruno dreams boats, he lives boats. Always designing and creating. Till he had found and built the perfect high speed workboat for rough environments. The Tideman RBB, Rigid Buoyancy Boat.

The indestructible high speed workboat
Bruno couldn’t rest before finding the solution to a major problem in the workboat industry, that is: Boats and water – all good. But boats and rocks… no good.
Bruno’s question: where is the high speed workboat that is untouchable in rough environments?

Bruno wanted a boat that isn’t scared of shallow waters, rocky shores or concrete ramparts. He wanted a boat that stands strong in any condition, from tropical heats to arctic freeze.

The answer: HDPE – High Density PolyEthyrene. The new plastic that is lighter then water. That is unsinkable. That can stand sunburning heat and piercing cold. That knows how to absorb a shock, to recover and to return to its original shape. That is absolutely impact resistant. NOTHING EFFECTS HDPE.

That’s how he came up with his RBB. Perfect RIB-like shape for a workboat, made from the indestructible material HDPE. A BOAT BUILT TO LAST.